• 2021-12-18

At present, the commonly used materials of metal stamping parts are: 1) SECC: galvanized iron sheet 2) Spec: tinned cold rolled sheet 3) Sus: stainless steel series 4) Al: aluminum series 5) Cu: copper series 6) PBR: white copper 7) Spte: Tinplate 8) Al set: lamp cover 9) Al Arg: lamp cover

• 2022-02-08

The three most important steps in a stamping factory are shearing, punching / cutting and folding. Stamping parts are sometimes used as metal pulling. The word comes from English platemetal. Generally, some metal sheets are pressed by hand or die to produce plastic deformation to form the desired shape and size, and more complex parts can be formed by welding or a small amount of mechanical proces...

• 2022-03-26

The design of metal stamping parts shall comply with the following rules: 1.The design of metal stamping parts must be simple in appearance and fair in structure, so as to simplify the die structure and the number of processes simplified by Guangdong metal stamping plant and Guangdong steel pipe plant, that is, complete the processing of the whole parts with the least and simplest stamping process...

• 2022-04-15

Usually, sheet metal is the material for the plate type, which is generally made into the specified shape and operated by the plate shearing machine or bending machine, while the machining is more complex. The material is massive, not simply bent and deformed, but cut, etc. the equipment generally uses lathes, grinding machines, etc

• 2022-06-17

At present, with the rapid development of science and technology, the market demands more and more metal stamping workpieces. In order to produce good stamping workpieces, plates generally need heat treatment after stamping. Appropriate heat treatment can significantly improve the mechanical properties of workpieces and prolong the service life of five metal stamping workpieces

• 2022-07-01

1. Auto parts: mainly including all kinds of auto structural parts, auto relays, new energy power battery accessories, etc. 2. Electronic parts: generally including connector parts, connectors, terminals, shrapnel parts, etc. 3. Household appliance parts: usually contain precision hardware parts of various household appliances, such as color tube, electron gun parts and household appliance parts. ...

• 2022-07-08

People in the metal stamping industry know that the surface stains of metal stamping parts come from the lubricating oil on the mold, and the mold must be lubricated at the beginning of processing. In this way, the workpiece will inevitably be stained with stains, so the surface stains need to be cleaned before the metal stamping parts are shipped. The principle of removing stains is: saponificati...